Pages

▼

Thursday, May 17, 2012

DIY - Making a Mason Jar Soap Pump

So a while back on Pinterest, (I'm pretty sure it's the devil, but I love it...lol) I ran across sever great ideas of things to do with mason jars.  One of them that I loved was a soap dispenser. So I thought I would give it a whirl. and it's super easy, so I though I would share how to do it with all of you in case you would like to make your very own.

So here we go....


Tools needed: A drill, with a 1/2 inch drill bit (the 1/2 inch was missing so I had to use the 7/16 and improvise), tin snips, and a box blade. 


Supplies you need: Pint size mason jar, mason jar lid and ring, and a soap pump.

I found the soap dispenser replacement pump at Lowes. I think it cost me about $1.50 - 1.75. I know I'm a big spender. lol

Oh and the jar lid I used was actually one that I had canned with and took off a jar. I washed it up and am re-using it...

I love being able to get all the good I possibly can out of an item!


Ok screw the lid an ring on the jar and drill a hole in the middle...

or as close to the middle as you can...

of the jar.

You will need to have hand holding on to the jar, when drilling through the lid.

I put the jar in an old ice cream bucket to catch all the metal shavings.


See there were lots of metal shavings.


Now you may or may not have a little piece of metal that is still hangin' on if so, then...


Take your tin snips and cut it off.  Like I said I didn't have a big enough drill bit, so I also used the snips to make the hole just a little bigger.


Now stick the pump through the hole in the lid and there you have it.


Now as you can see the straw that will stick down in the soap is a little long so it will need to be trimmed up.


I used a box blade to trim this one, but you might be able to use a pair of scissors.


Once you get it the right length put the ring over the lid and place on jar. I also took some hot glue and went around the pump to make it a little more solid, but I really don't think you need to do this.


Now add your favorite soap to it and enjoy.

I have another fun Mason Jar DIY that I will hopefully get to share here in a day or two.

JP

at

15 comments:

  1. AnonymousMay 17, 2012 at 7:03 AM

    Very creative! I might have to make this for my husband's bathroom.

    ReplyDelete
    Replies
    1. treelight1February 27, 2013 at 6:37 PM

      can find some cool pump tops at onedreamdesign.com and some neat jar ideas here http://www.onedreamdesign.com/sink/indexrecycledpump.shtml

      Delete
    2. AnonymousMarch 28, 2013 at 4:58 PM

      Thanks for the recommendation! I ordered a few tops from them and they are gorgeous

      Delete
    3. beehappyMarch 13, 2014 at 2:58 PM

      you can also find a great selection of dispenser pumps at Aftosa for a great price and free shipping! http://www.aftosa.com/dispenser-pumps/

      Delete
  2. AnonymousMay 17, 2012 at 7:04 AM

    Very creative! I might have to my this for TNT's bathroom.

    ReplyDelete
  3. StephMay 17, 2012 at 7:46 AM

    I pinned this a long time ago too, just haven't had time to do it!

    ReplyDelete
  4. Janet PhillipsMay 17, 2012 at 8:10 AM

    I know I did too, but I had to wait till Caleb brought the drill and drill bits back home so I could do it. I think I need my own tools and then I wouldn't have to worrie about this. :)

    ReplyDelete
  5. TxFarmhouseMay 17, 2012 at 9:28 AM

    Love it! Hooray for you! And if Pinterest is going to give us some great ideas for being more frugal, I'm all for it!

    ReplyDelete
  6. MarissaMay 17, 2012 at 2:03 PM

    LOVE it!!!

    ReplyDelete
  7. UnknownOctober 18, 2012 at 5:48 AM

    I'm now following you on Pinterest but would love to pin this particular article. is there an option to do so?

    ReplyDelete
  8. UnknownFebruary 7, 2013 at 3:48 AM

    Nice Blog! A Liquid ring pumps gives definitive advantage over other vacuum pump. It needs low-cost of maintenance as it does not require many vanes or valves.

    thanks a lot for sharing
    http://www.pfspumps.com/pumps/vacuum-pumps/liquid-ring-vacuum-pumps-TRH

    ReplyDelete
  9. JanetJuly 15, 2013 at 5:47 PM

    I made one of these but I used an ice cream lid and cut out a ring instead of using a canning lid because I'd read where one lady had made these but hers rusted. Has anyone else had this happen?

    ReplyDelete
    Replies
    1. UnknownJuly 15, 2019 at 1:37 PM

      I did two and they both rusted after a while

      Delete
  10. MaheshSeptember 22, 2015 at 7:03 AM

    Hi,
    It is really a nice creativity, thanks for sharing the great tips.

    Stainless Steel Hand Dryers & Soap Dispenser

    ReplyDelete
  11. TDL HygieneFebruary 1, 2018 at 2:11 AM

    Thanks for Sharing Blog!!
    Look here at the best deal of online shop, TDL hygien. We are specialized in manufacturer and wholesale supplier of dispenser and cleaning products. We are foucused mainly cover soap dispensers, hand soap refill bags, toilet paper towel dispensers, air freshener dispensers, hand dryers etc.

    ReplyDelete